Product
Approvals
- FM
Factory Mutual
- AGA
American Gas Association
- CSA
Canadian Standards Association
- CGA
Canadian Gas Association
- CRN Numbers for
Direct Fired Vaporizers
- UL
Underwriters Laboratories
- CE Mark
European Approval
|
AES products are designed
and manufactured to applicable U.S. and international standards, rules and
regulations, including NFPA 58; ASME Boiler and Pressure Vessel Code;
European PED and ATEX; etc.
Essentially all our products are Factory Mutual (FM) approved and listed
with American Gas Association (AGA) Canadian Standards Association (CSA),
and Canadian Gas Association (AGA). They can also be built for Industrial
Risk Insurers (IRI) installations.
After October 2003, all equipment
control panels can be supplied with UL approval (UL 508 A).
As of August 2006,
all POM Blenders are available with European CE Mark.
European CE Approval for Horizontal
Water Bath Vaporizers was received in May 2009.
|
|
Manufacturing
Approvals
-
"S"-Stamp
for Direct Fired Vaporizers
-
"U"-Stamp
for Direct Fired Vaporizers
-
"U"-Stamp
for Unfired Pressure Vessels
-
"R"-Stamp
for Repairs and Modifications
-
National
Board Registration for all "stamped" pressure vessels.
-
UL (508A) Label
for Equipment Control Panels
-
CE Mark (European
Approval)
for POM Blenders
-
CE Mark (European
Approval)
for Horizontal Water Bath Vaporizers
|
The AES manufacturing
operation is ASME (American Society of Mechanical Engineers) approved and
authorized to apply “S”, “U”, and “R” stamps, and is also
authorized to register products with the National Board of Boiler and
Pressure Vessel Inspectors. The ASME approval also includes approval of
the AES Quality System.
CRN numbers, valid for all
Canadian Provinces and Territories, have been assigned for most heat
exchangers of the WB-series of Horizontal Water Bath Vaporizers.
The AES manufacturing operation is
authorized to apply the UL (508A) label to appropriately designed
and manufactured equipment control panels.
The AES manufacturing operation is
authorized to apply the CE Mark to pressure vessels manufactured in
accordance with the European PED (Pressure Equipment Directive); and
is authorized to apply the CE Mark to equipment control panels
manufactured in accordance with ATEX, LVD, EMC, etc. |
